Whether you’re looking for case studies, the latest news, or a specific product brochure – the AMS Resource Center can help. Use the drop down menus below to find what you’re looking for.
Addressing PFAS Challenges: Insights from AMS at WEFTEC 2024
In this engaging interview from WEFTEC 2024, Rick Bacon, CEO of AMS, joins Paul Gagliardo, Innovation Director of The Water Entrepreneur Podcast, to discuss the pressing challenges of treating difficult-to-remove contaminants, with a particular focus on PFAS. Throughout their conversation, Rick shares his insights on the prevalence of PFAS discussions at the conference and highlights the complexities faced by consumers when choosing between various treatment technologies—whether extraction, absorption, or destruction. He emphasizes the need for comprehensive, end-to-end solutions that not only capture but also destroy contaminants to prevent them from re-entering the environment.
An insightful dialogue with AMS CEO Rick Bacon and BIOBOX Water COO Joaquín Murría Martín at WEFTEC 2024 where the two met to discuss the BIOBOX® Nitrate Removal technology. Following a successful seven-month pilot in Gilbert, Arizona, BIOBOX is now preparing for future demonstrations in the U.S., with potential collaborations at Cleveland Water Alliance and The Water Tower. With promising results and growing interest, AMS and BIOBOX look forward to continuing their efforts to bring this sustainable denitrification solution to the U.S. market in 2025.
BIOBOX and AMS Open House (Gilbert, Arizona) – Interview
Watch this insightful interview of Jeff Bower from the Town of Gilbert, AMS CEO Rick Bacon, and BIOBOX Water Director of Operations, Joaquín Murría Martín, about the BIOBOX Nitrate demonstration at the recent Open House in Gilbert, Arizona. They discussed the innovative BIOBOX system’s ability to remove nitrates efficiently with minimal water loss compared to reverse osmosis, which loses about 30% of water and generates contaminating waste. They emphasized the focus on both capital and treatment costs, highlighting BIOBOX Nitrate’s comprehensive solution.
BIOBOX and AMS to Deliver Denitrification Solution to the US
Rick Bacon, CEO of AMS, recently visited Joaquín Murría Martín and the BIOBOX team at their facility in Zaragoza, Spain, to see the first BIOBOX® Nitrate being prepared for shipment to the US. BIOBOX Nitrate transforms nitrates in drinking or wastewater into harmless nitrogen gas through a biological process, eliminating nitrates without producing polluting byproducts. This fully automated, turnkey containerized nitrate treatment system integrates AMS’ online Instran™ nitrate analyzer for continuous, real-time control of system performance. The patented BIOBOX biological denitrification system, which is certified by SGS and NSF for the treatment of drinking water, urban or industrial wastewater, and reuse, can be deployed rapidly at the thousands of sites in the US where nitrates put at risk human health and the environment. Together, AMS and BIOBOX are delivering a transformative, intelligent and reliable nitrate treatment solution.
AMS Talks: City of Alamosa Evaluates SafeGuard™ H2O Arsenic Removal Technology
The City of Alamosa, Colorado, evaluated the SafeGuard™ H2O arsenic removal technology to replace the use of bulk ferric chloride. The evaluation demonstrated the technology’s ability to provide effective and reliable arsenic removal below 5 ppb with a ferrous dose of 6.5-8 mg/L that was generated on-site and on-demand. The demonstration also evaluated the purity of the in-situ electrogenerated ferrous reagent compared to bulk ferric chloride, showing SafeGuard™ H2O’s ferrous reagent precursor to be of higher quality. In this episode of AMS Talks, Industry Consultant Nadia Abboud speaks with Roy Sanchez, CWP, Water Plant Operator for the City of Alamosa, and Dr. Vladimir Dozortsev, Senior Product Manager for AMS, who discuss insights about this project and what prompted the City of Alamosa to undertake this arsenic removal demonstration.
AMS Talks: Alternatives to Bulk Ferric Chloride in Water Treatment
Ferric chloride is a water treatment chemical widely used to remove impurities in water and wastewater. While ferric chloride is effective and approved for use in a range of applications, there is a lack of adequate quality controls and certification for this bulk chemical. Ferric chloride contains a range of contaminants, including manganese, chromium, arsenic, zinc, lead, and copper that can be found in high concentrations and can be very harmful to human health. In addition, ferric chloride is an extremely corrosive and potentially hazardous substance that requires it to be handled and stored with care, driving the cost of treatment. In this episode of AMS Talks, Rick Bacon, CEO of AMS, and Industry Consultant Nadia Abboud discuss the use of ferric chloride as a water treatment chemical, and the need for alternative solutions that do not contaminate our water supply.
AMS Talks: SafeGuard™ H2O Arsenic Removal Demonstration at California American Water’s Isleton Water System
In this episode of AMS Talks, Rick Bacon, CEO of AMS, speaks with Joshua Webster, water treatment operator for California American Water about the demonstration of SafeGuard™ H2O arsenic removal technology at the Isleton Water System. The demonstration at Isleton showed the effectiveness of SafeGuard™ H2O to mitigate total arsenic contamination in drinking water below 10 ppb, and its ability to deliver an affordable and reliable fully automated treatment process that does not require the use of bulk chemicals like conventional treatment approaches (e.g., coagulation/filtration).
SafeGuard™ H2O In-situ Reagent Generation Technology and Carbon Footprint Reduction
AMS CEO Rick Bacon and Sr. Product Manager Vladimir Dozortsev, Ph.D., discuss the SafeGuard™ H2O in-situ reagent generation technology, which is designed to effectively and economically treat a wide range of contaminants found in drinking water and wastewater, including phosphate. SafeGuard™ H2O offers facilities an affordable, non-hazardous and environmentally sustainable solution to address trace metal and inorganic contaminants. Watch now to learn more about the SafeGuard™ H2O in-situ reagent generation process and its operational advantages over bulk chemical and electrocoagulation.
Looking to achieve phosphate removal without any of the process limitations found in bulk chemicals or electrocoagulation? Watch AMS CEO Rick Bacon’s insightful presentation on AMS’ SafeGuard™ H2O in-situ reagent generation technology which offers a disruptive innovation for facilities looking to manage phosphate in a cost-effective, environmentally sustainable and carbon neutral manner.
SafeGuard™ H2O System Testing for NSF/ANSI 61 Standard
AMS Sr. Product Manager, Vladimir Dozortsev, Ph.D., offers a quick preview of the innovative SafeGuard™ H2O in-situ reagent generation system undergoing testing for NSF/ANSI 61 Standard. A 10 gpm SafeGuard H2O stannous generation system was used in the test. The fully automated system generates a reagent on demand, providing economical and reliable treatment of a wide range of contaminants for small and large water systems.